855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64151512ERL

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64151512ERL
$46.99 ea
NEWARRIVING SOONEstimated Ship Date 04/22/2024 (If Ordered Today)45 Available from HOLLEY PERFORMANCE PRODUCTS as of 03/28/2024
Model: 4001419
STANDARD
DELIVERY
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
Features:
  • Extruded PTFE
  • Standard Of Racing Industry
  • Firmer Brake Feel
  • For Flexible Brake & Clutch Hoses
  • For Instrument Hoses
  • Pressure Tested To 4000 PSI
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.
Installation Notes:
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.

Specifications:

Emission Code 5
Fluid Type Pump Gas, Diesel, Automatic Transmission Fluid, Coolant, Oil, Race Gas, Bio-Fuels, E85, Methanol/Alcohol, Brake Fluid
Fluid Type Rating - Automatic Transmission Fluid 5 out of 5 Rating
Fluid Type Rating - Bio-Fuels 5 out of 5 Rating
Fluid Type Rating - Brake Fluid 5 out of 5 Rating
Fluid Type Rating - Coolant 5 out of 5 Rating
Fluid Type Rating - Diesel 5 out of 5 Rating
Fluid Type Rating - E85 5 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol 5 out of 5 Rating
Fluid Type Rating - Oil 5 out of 5 Rating
Fluid Type Rating - Power Steering Fluid 5 out of 5 Rating
Fluid Type Rating - Pump Gas 5 out of 5 Rating
Fluid Type Rating - Race Gas 5 out of 5 Rating
Fluid Type Rating - Vacuum 1 out of 5 Rating
Hose End #1 1/8" NPT MALE
Hose End #2 1/8" NPT MALE
Hose End Finish Electroless Nickel Plated
Hose End Material Steel
Hose Outer Material Stainless Steel
Hose Size 4 AN
Inside Diameter .173"-.203"
Length 12 In.
Max Working PSI 2000 PSI
Min. Bend Radius 1.5"
Outside Diameter .304"-.343"
Part Type Fuel Hose
Product Type Hose Assembly
Proposition 65 www.P65Warnings.ca.gov
PTFE Wall Thickness .040"
Submersible in Fuel Yes
Temperature Range -65⁰ to 450⁰ F

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64151512ERL:

Frequently bought together

Classic Nova 2024