855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Holley 750 CFM Street HP Carburetor 0-82751

Holley 750 CFM Street HP Carburetor 0-82751
Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751Holley 750 CFM Street HP Carburetor 0-82751
$1,104.99 ea
NEWOUT OF STOCK
Model: 3990561
STANDARD
DELIVERY
The Street HP™ uses the best features from Holley's race Bred 4150 HP™ carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used on the 650 and 750 cfm models so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor. Limited to stock. replaced by 0-82751SA
Features:
  • Vibratory polished for good looks
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturri inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Mechanical secondaries for awesome tire turning performance
  • Dual accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Installation Notes:
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.

About Holley Performance Products

Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors powered every Monster Energy NASCAR Cup team and nearly every NHRA Pro-Stock champion for four decades. Now, Holley EFI products power these cars and are dominating the performance world. Holley products for GM's popular LS engine are dominating the LS scene as well. Holley's products also include performance fuel pumps, intake manifolds and engine dress-up products for street performance, race and marine applications. As a single solution or partnered with products from other Holley companies we can give you the edge you need over the competition!

Downloads:

Download Name File Size
techlibrary_carb_numerical_listing.pdf611.91KB
199r10319-2rev2.pdf846.89KB

Videos:

Specifications:

Barrels 4
Booster Down Leg
Booster Type Down Leg
Carburetor Use Performance and Race
CFM 750
Choke None
Condition NEW
Emission Code 3
Finish Shiny
Fuel Gasoline
Fuel Inlet Dual
High Speed Air Bleed 36
Idle Air Bleed Size 71
Marine Use No
Material Aluminum
Model 4150
Part Type Carburetor
Primary Main Jet 77
Primary Power Valve 4.5
Primary Pump Nozzle Size 28
Product Type Carburetor
Proposition 65 www.P65Warnings.ca.gov
Secondaries Mechanical
Secondary Main Jet 84
Secondary Pump Nozzle Size 31
Supercharged Application No
Throttle Bore 1.688 inch
Venturii Size 1.375 inch
Warranty Limited 90 Day

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Holley 750 CFM Street HP Carburetor 0-82751:
Classic Nova 2024