OER® reproduction of the correct retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic material as…
OER® reproduction of the original grommet and sleeve unit where the accelerator rod fits into linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your throttle rod from…
The C6 throttle pedal bracket is a bolt-on bracket that mounts the 2005-2013 C6 Corvette electronic throttle pedal to the firewall in a 1967-69 F-Body/1968-74 X-Body. The bracket comes in black e-coat.Details: C6 Throttle Pedal Kit Mounts…
This is the essential link between the accelerator pedal lever and the carburetor. For use on vehicles with 4bbl carbs. Fits: 1967-69 Camaro models with 327 or 350 with 4bbl carburetors …
Reproduction of Original Reproduction of the final link in your Nova models accelerator/throttle activation system. This special rod connects between the throttle arm and the accelerator pedal. For V8 models only…
Reproduction of Original Reproduction of the final link in your Nova models accelerator/throttle activation system. This special rod connects between the throttle arm and the accelerator pedal. For 396 Big Block. …
Reproduction of Original Reproduction of the final link in your Nova models accelerator/throttle activation system. This special rod connects between the throttle arm and the accelerator pedal. For 327/350 nova.…
High Quality Reproduction Throttle Cable Ball Stud Kit Attached Cable To Carburetor Lever Kit Includes Ball Stud, Nut And Star Washer Your Nova or Chevy II's accelerator ball stud keeps your accelerator cable properly attached to the…
Reproduction of the accelerator pedal rod for 1967-69 Camaro models. This rod connects between the throttle arm and the accelerator pedal. Applications:1967-69 Camaro V8 models with single carb …