| Buick |
Skylark |
1975 - 1979 |
Skylark (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Buick |
Skylark |
1980 - 1981 |
rear speaker, Century & Regal (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to orig inal wiring. |
| Buick |
Skylark |
1982 - 1987 |
rear speaker, Regal & Grand National (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Bel Air |
1970 - 1981 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Biscayne |
1970 - 1972 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Blazer |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Blazer |
1973 - 1974 |
front single dash speaker, (wiring from speaker to speaker harness connector) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Blazer |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Blazer |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| Chevrolet |
Brookwood |
1970 - 1972 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Camaro |
1970 - 1992 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Caprice |
1970 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Chevelle |
1973 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Chevelle |
1970 - 1972 |
rear speaker, Monte Carlo (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Corvette |
1978 - 1982 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Corvette |
1984 - 1989 |
without Delco-Bose sound system (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to or iginal wiring. |
| Chevrolet |
El Camino |
1973 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
El Camino |
1978 - 1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
El Camino |
1970 - 1972 |
rear speaker, Monte Carlo (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Impala |
1970 - 1985 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Kingswood |
1970 - 1972 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Malibu |
1973 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Malibu |
1978 - 1983 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Monte Carlo |
1973 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Monte Carlo |
1978 - 1988 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Monte Carlo |
1970 - 1972 |
rear speaker, Monte Carlo (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Monza |
1975 - 1980 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Nova |
1970 - 1979 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Suburban |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Suburban |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| Chevrolet |
Townsman |
1970 - 1972 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Chevrolet |
Vega |
1971 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C15 Suburban |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C15 Suburban |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C15/C1500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C15/C1500 Suburban |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C1500 Suburban |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C1500 Suburban |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C1500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C1500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C1500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
C15 |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C15 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C25 Suburban |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C25 Suburban |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C25/C2500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C25/C2500 Suburban |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C2500 Suburban |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C2500 Suburban |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C2500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C2500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C2500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
C25 |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C25 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C35/C3500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C3500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C3500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C3500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
C35 |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
C35 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
Jimmy |
1973 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
Jimmy |
1978 - 1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
Jimmy |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
K15 Suburban |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K15 Suburban |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K15/K1500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K15/K1500 Suburban |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K1500 Suburban |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K1500 Suburban |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K1500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K1500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K1500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
K15 |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K15 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K25 Suburban |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K25 Suburban |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K25/K2500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K25/K2500 Suburban |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K2500 Suburban |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K2500 Suburban |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K2500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K2500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K2500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
K25 |
1975 - 1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K25 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K35/K3500 Pickup |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K3500 |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K3500 |
1979 - 1986 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K3500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
K35 |
1977 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
K35 |
1978 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R1500 Suburban |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R1500 Suburban |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
R1500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R2500 Suburban |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R2500 Suburban |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
R2500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R2500 |
1988 - 1989 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
R3500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
R3500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
S15 Jimmy |
1983 - 1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
S15 Jimmy |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
S15 |
1982 - 1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
S15 |
1988 - 1990 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
Sonoma |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
Sonoma |
1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
Syclone |
1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
Tracker |
1989 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
Transmode |
1973 - 1974 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
Typhoon |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V1500 Suburban |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V1500 Suburban |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
V1500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V2500 Suburban |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V2500 Suburban |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
V2500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V3500 |
1987 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| GMC |
V3500 |
1988 - 1991 |
rear speaker, R/V Series (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speaker. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| GMC |
Yukon |
1992 - 1993 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Oldsmobile |
Cutlass |
1973 - 1988 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Firebird |
1982 - 1992 |
(wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Firebird |
1970 - 1978 |
rear speaker, (wiring from speaker to speaker harness connector) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Firebird |
1979 - 1981 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
GTO |
1971 - 1972 |
Ventura (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
GTO |
1973 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Grand Am |
1978 - 1979 |
Phoenix (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Grand Am |
1973 - 1980 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Grand Prix |
1977 |
front speaker, Fullsize (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original w iring. |
| Pontiac |
Grand Prix |
1982 - 1986 |
rear speaker, Bonneville (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Grand Prix |
1973 - 1987 |
rear speaker, Grand Prix (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
LeMans |
1977 - 1979 |
Phoenix (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
LeMans |
1971 - 1972 |
Ventura (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
LeMans |
1973 - 1981 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Ventura |
1977 |
Phoenix (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Ventura |
1971 - 1972 |
Ventura (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
| Pontiac |
Ventura |
1973 - 1976 |
rear speaker, (wiring from speaker to speaker harness connector, 1 required per speaker) Use when installing aftermarket speakers. Made to solder wires directly to aftermarket speaker and with correct connector for connection to original wiring. |
IMPORTANT: Electrical items are covered by a 30 day EXCHANGE ONLY WARRANTY. There are no returns or refunds on such items.
