QA1’s Level 3 Drag Kit is a complete solution for Chevy Nova and other GM X-body owners who drag race their car. This complete solution replaces your entire front and rear suspension, optimizing your car for weight transfer and straight-line performance. The 4-way adjustable MOD Series offer plenty of control and ride height adjustability. With the rear suspension allowing additional space for drag radials or slicks, you have the perfect combination.
QA1's tubular front control arms stand out as some of the lightest available in the market. Beyond their lightweight design, racers have the flexibility to fine-tune launch characteristics using an adjustable droop stop. The inclusion of QA1's low-friction ball joints and ultra-low-friction composite bushings enhances weight transfer, ensuring smooth and bind-free movement. When paired with QA1's MOD Series coilovers, this kit offers plenty of control over front-end movement.
Factory coil spring and leaf springs limit your ability to achieve the perfect stance on your Nova. Upgrading to QA1’s coilovers and a tubular 4-link provides 0 to -2 inches of adjustability in the front and +2 to -3 inches of ride height adjustability in the rear, letting you dial in exactly the look you want.
Designed to work with both standard and mini-tubs, this system offers generous clearance for up to 11-inch-wide wheels and 315mm tires. This enables you to choose the appropriate tire for the class you race, or street/strip combination.
Note: Achieving maximum wheel and tire width will require mini tubs.
4-way adjustable MOD shocks help drivers easily adapt to any surface and conditions, whether at a bracket event or racing no-prep. High force curve capabilities ensure important factors like weight transfer and wheel spin can be dialed in to get your Nova down the track faster than ever.
Thoughtful design meets effortless installation with a completely bolt-in front suspension and a 4-link requiring minimal welding. You'll experience a painless installation and setup process, where adjusting ride height, pinion angle, or wheelbase is as simple as a few tweaks – no link removal required. No modifications to floor pan required.
Note – Welding required
QA1 suspension is proudly made in Lakeville, Minnesota.
Wheel and tire fitment should be verified on the vehicle
Welding Required
Includes Spanner Wrench
QA1 Subframe Connectors strongly recommended
May require Exhaust Modification
From bolt-on products that get you behind the wheel faster, to experienced technicians available to help increase your 60’ times or handle curves with confidence, everything we do is designed to get you out on the road.
Whether your goal is a Saturday night sprint across the checkered flag or a slow, easy cruise down main street, we have the suspension and driveline products you need for the experience you want.
No matter what you drive, we want you to #goDRIVEit!
| Make | Model | Years |
| Chevrolet | Chevy II | 1968 |
| Chevrolet | Nova | 1969 - 1972 |
| Pontiac | Ventura | 1971 - 1972 |
| Part Type | Suspension Kit |
| Proposition 65 | www.P65Warnings.ca.gov |
| Warranty Time | 1 YR |
