During the manufacturing process for the bodies of many current classic General Motors products, a chemical bath would be used. Drains incorporated into the bodywork to assist in this production step would later be covered. This floor…
Secure your window crank and lock knob in place with our Retaining Clip. Engineered for durability and precision fitment, this clip ensures your interior components remain securely attached, enhancing the functionality and aesthetics of…
During a day out behind the wheel of your classic Chevy you may encounter a desperate need to clean your windshield. An easy task to complete with supply of windshield washer fluid, a cracked or broken jar will make the effort of cleaning…
Dome light bulbs are commonly missing, broken or heavily discolored. Not only will our LED dome light bulbs increase brightness and reduce heat and power, but they are very easy to install as you replace your bulbs. You will instantly…
Is your radio getting poor reception or no longer working for AM/FM stations due to a worn-out or broken power antenna in your vehicle? Replace it with this 31" (79cm) 5-section chrome power antenna so that you can enjoy clear radio…
Direct-fit windshield washer pump for 1971–1991 GM cars and trucks designed to restore reliable washer fluid delivery and improve safety. This 12V replacement pump installs into the factory reservoir opening and delivers consistent spray…
Our patented Side Post Battery Disconnect switch is designed to be used with General Motors style batteries with the connections on the side. A simple twist of a knob provides a convenient way to quickly disconnect and reconnect…
These die-cast, ribbed, door lock knobs are heavy-duty die-cast reproductions of the original ribbed style door lock knobs found on a wide variety of GM models from 1968-90 including (but not limited to) the models listed below. Each set…
The GM Car & Truck Floor Mount Headlight Dimmer Switch (12 Volt) is a factory-style replacement designed to restore proper high and low beam functionality in classic GM vehicles. Mounted on the driver-side floor, this 12V switch…
Ensure secure attachment of your throttle rod or clutch linkage with this factory-correct retainer clip, designed for GM cars and trucks. This clip provides a precise fit and stable connection, preserving the original functionality of your…
Elevate your vehicle's visibility and style with our 7 Inch Round LED lights featuring Halo Daytime Running Lamps and Turn Signals. Experience enhanced safety on the road with powerful illumination and dynamic signaling. Crafted for…
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green…
Trying to keep a car cover on the car in windy conditions can be difficult. Doing so just gotten easier with this new wind gust guard kit.
For use with passenger car and light truck car covers
Each kit…
0.30mm clear PVC top cover.
0.45mm basemat is mildew, abrasion and flame resistant.
Heavy Duty Basemat Impervious to oil, gas, and antifreeze.
Rust free;100% Nylon “self-healing” coil zippers.
No metal parts inside! No metal…
Restore the functionality and appearance of your brake pedal with this high-quality Brake Pedal Pad, designed for 1966-1981 GM cars and Trucks equipped with an automatic transmission and drum brakes. This pedal pad provides a…
Headlight bezels on your classic take several hits over the years, leaving them bruised and battered. Harsh weather conditions damage your headlight bezels while road dirt and rocks beat and sandblast the finish away. Over time, your…
Ensure reliable operation of your vehicle’s turn signals with this 20 Amp 2-terminal turn signal flasher. Designed for compatibility with a wide range of classic and modern vehicles, this flasher provides consistent performance for…
Direct-fit windshield washer jar engineered for 1962–1972 GM cars and light trucks. This reservoir stores washer fluid, supports the washer pump and grommet, and provides a leak-resistant mount in the original OE location. Constructed…
This 4-piece headliner center bow clip set is a direct-fit replacement for classic muscle cars, designed to securely fasten the headliner center bows and restore proper alignment. Compatible with specified Camaro, Firebird and Nova model…
This 12-piece set of Phillips oval-head screws is perfect for various automotive restoration projects. Sized at #8 x 3/4", these screws provide a secure and reliable fastening solution for interior and exterior applications, offering…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Resistant to damage caused by corrosion and vibration.. Bolts, nuts and washers…
A replacement positive wire terminal boot designed for 1962–1985 Chevrolet cars and trucks. This insulating cap protects the alternator’s positive post and wiring from accidental shorts, moisture, dirt, and corrosion while restoring…
These tapered bullet-style rubber stoppers are designed to fit a 1/4" hole, offering a versatile solution for sealing or protecting open holes in various automotive applications. Ideal for vehicles manufactured between 1947 and 1991…
Ensure reliable tail light performance with this 3-wire tail lamp socket with pigtail, designed for GM cars and trucks. This high-quality socket provides a secure connection for tail lamps, maintaining proper functionality and…
Add a touch of shine and durability with this set of #8 x 3/4" oval Phillips head screws, chrome-plated for a polished finish. Perfect for various automotive and restoration projects, these screws provide both functionality and aesthetic…
Upgrade your vehicle's lighting with this 2-piece set of 1156 LED light bulbs, featuring 9 miniature hyper white LEDs per bulb. These energy-efficient bulbs provide bright, reliable illumination, making them perfect for tail lights, brake…
Upgrade your vehicle’s interior with our Automotive Upholstery Installation Kit, featuring economy pliers and rust-resistant hog rings. Ideal for securely installing car seat covers and repairing automotive upholstery, this kit…
These 16" wiper blades are manufactured from quality molded rubber as original. Refill is manufactured with a heavy duty stainless steel spine that is flexible and corrosion free. Designed to fit our Part # ME7601 reproduction Anco-style…
Ensure a secure seal for your power steering system with this power steering pump cap, designed for 1962-1999 vehicles equipped with Saginaw pumps. This factory-correct cap prevents fluid leaks and contamination, maintaining the optimal…