Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (21)$10 to $25 (60)$25 to $50 (61)$50 to $100 (46)$100 to $250 (39)$250 to $500 (27)$500 & Above (83)
$ to $ go
Manufacturer
Show Less Filters
Model: 3089583
Condition: NEW
The Precision Trunk Weatherstrip Seal TS 101 SA is an OEM-style trunk seal designed to restore a watertight, quiet closure for trunk lids. Molded from durable EPDM rubber with a self-adhesive backing, this profile seals gaps, prevents…
Model: 1024813
Condition: NEW
Direct-fit windshield washer pump for 1971–1991 GM cars and trucks designed to restore reliable washer fluid delivery and improve safety. This 12V replacement pump installs into the factory reservoir opening and delivers consistent spray…
Model: 2040506
Condition: NEW
Trying to keep a car cover on the car in windy conditions can be difficult. Doing so just gotten easier with this new wind gust guard kit.
For use with passenger car and light truck car covers
Each kit…
Model: 1024653
Condition: NEW
Direct-fit windshield washer jar engineered for 1962–1972 GM cars and light trucks. This reservoir stores washer fluid, supports the washer pump and grommet, and provides a leak-resistant mount in the original OE location. Constructed…
Model: 3123370
Condition: NEW
This 1/4" inside diameter windshield washer hose, sold by the foot, is flexible vinyl tubing engineered to deliver washer fluid reliably from reservoir and pump to nozzles. Universal 1/4" ID sizing fits most factory and aftermarket…
Model: 3084272
Condition: NEW
A direct-fit left and right hand 2-piece door weatherstrip kit designed to restore proper sealing on 1968 2-door sedans (DWP 1210 68). This kit replaces worn or damaged door seals to prevent water intrusion, reduce wind noise, block dust…
Model: 2029446
Condition: NEW
A green 3/8" pinch-style fuel and vacuum hose clamp designed for classic GM vehicles from 1961–1982. This clamp secures small-diameter hoses to fittings with a simple crimp action, providing a low-profile, OEM-appropriate solution for…
Model: 2033809
Condition: NEW
Steel Braided Hose Kit is the most inexpensive, but eye-catching way to decorate your engine bay for a show cars high quality appearance or to replace the old dirty look of rubber hoses and lines. Simply disconnect one end of each…
Model: 2029030
Condition: NEW
Wire-ring clamps like this were used on all 1967-68 Camaro heater hoses from the factory and being basically painted they were very susceptible to rust and corrosion.
…
Model: 2029026
Condition: NEW
This ribbed heater hose set is designed to replace aging or worn heater lines on 1958–1981 GM cars and trucks, restoring reliable hot-coolant flow to the heater core. The ribbed exterior resists kinking and improves flexibility for…
Model: 2029029
Condition: NEW
Wire-ring clamps like this were used on all 1967-68 Camaro heater hoses from the factory and being basically painted they were very susceptible to rust and corrosion.
…
Model: 4962080
Condition: NEW
Steel Braided Hose Kit is the most inexpensive, but eye-catching way to decorate your engine bay for a show cars high quality appearance or to replace the old dirty look of rubber hoses and lines. Simply disconnect one end of each…
Model: 4962081
Condition: NEW
Steel Braided Hose Kit is the most inexpensive, but eye-catching way to decorate your engine bay for a show cars high quality appearance or to replace the old dirty look of rubber hoses and lines. Simply disconnect one end of each…
Model: 4897661
Condition: NEW
Manufactured from high quality aluminum to last the life of your vehicle. Metal screen and magnet to capture contaminates and metallic particles. Equipped with spring bypass that will engage if the filter becomes plugged. The filter can be…
Model: 3084696
Condition: NEW
Quality Reproduction Correct Style Brake Booster Check Valve & Grommet Hose is Cut To Fit (2) Correct Black Pinch Clamps
…
Model: 3038442
Condition: NEW
These are the fasteners needed to assemble heater related components.…
Model: 4826142
Condition: NEW
A cut-to-fit 3/8" I.D. x 3 ft power steering return hose engineered for 1960–1980 GM and Chrysler applications. This flexible return line routes low-pressure fluid from the steering gear back to the reservoir, restoring leak-free…
Model: 3237454
Condition: NEW
Reproduction Fuel And Vapor Hose Set
Correct Appearing Hose
Kit Contains: Includes Hose And Clamps
When it comes to your 1965-1970 Chevy II or Nova fuel hoses, better safe than sorry. Old fuel hoses can begin to break…
Model: 3202246
Condition: NEW
Correct Reproduction
Galvanized Finish
Slotted Hex Head Screw
Fits Upper Radiator Hose
Two Required Per Car
Made In The USA
Tower clamps like this were used on all 1967-69 Nova radiator hoses from the factory and being…
Model: 3125281
Condition: NEW
Correct Reproduction
Galvanized Finish
Slotted Hex Head Screw
Fits Upper Radiator Hose
Two Required Per Car
Made In The USA
Tower clamps like this were used on all 1967-69 Nova radiator hoses from the factory and being…
Model: 3085259
Condition: NEW
Reproduction of Original Radiator & Heater Hose Clamps Kit Includes: 2 Upper Hose Clamps 2 Lower Hose Clamps 2 5/8 Heater Hose Clamp Wire Rings 2 3/4 Heater Hose Clamp Wire Rings
…
Model: 5022478
Condition: NEW
Right-hand trunk floor drop-off panel for 1968-1974 Chevy II / Nova. This weld-in replacement restores the correct trunk-to-quarter-panel contour, provides a solid substrate for carpet and trim, and addresses common rust and corrosion…
Model: 5022477
Condition: NEW
Left-hand trunk floor drop-off panel for 1968-1974 Chevy II / Nova models. This weld-in replacement restores the factory contour where the trunk floor steps down at the rear, re-establishing structural support, a correct mounting surface…
Model: 4012620
Condition: NEW
These Mr. Gasket brackets help prevent oil leaks from stamped valve covers. They allow you to tighten down valve covers and prevent bending the flange by distributing clamp load.
Features:
Chrome Plated Steel
Custom Short…
Model: 3991209
Condition: NEW
• This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower
• A pre-calibrated fuel-level sending…
Model: 3173438
Condition: NEW
Reproduction Fuel And Vapor Hose Set
Correct Appearing Hose
Kit Contains: One 13 " 3/8" Hose, One 6" 3/8 Hose And Clamps
When it comes to your 1965-1979 Chevy II or Nova fuel hoses, better safe than sorry. Old fuel hoses…
Model: 5073498
Introducing our custom Billet 2 1/2 inch Clamps—designed specifically for mounting your Vapor Trapper™. Available in black or clear anodized finishes, these high-quality clamps offer a clean, durable look that complements…
Model: 5073495
Vapor Trapper™ High Performance Basic Install Packages are now available!Comes with -8 End Caps for use with high horsepower engines with a need for 1/2" vent lines. (can also be used with ANY fuel tank needing a larger vent…
Model: 5073487
Vapor Trapper™ Basic Install Packages are now available!Get everything you need for a proper Vapor Trapper™ installation in one package!Includes: 1 x Vapor Trapper™ (Select model at checkout) 2 x Barb Fittings (Select…
Model: 5023361
Condition: NEW
Complete right-front floor assembly designed for 1968–1974 Chevy II / Nova vehicles. This direct-fit replacement includes the right front floor pan, integrated seat belt bracket, and the 1/2 center hump section to restore structural…
Model: 5023360
Condition: NEW
Complete left-front floor panel engineered for 1968–1974 Chevy II / Nova that replaces corroded or damaged flooring while restoring structural integrity and proper seat belt mounting. This unit includes the integrated seat belt bracket…
Model: 5022447
Condition: NEW
1968-1972 Chevy II / Nova Right Rear Frame Rail Assembly designed to restore the rear structural integrity of your classic Chevy. This direct-fit replacement supports rear suspension mounting points, aligns body panels, and protects the…
Model: 5022446
Condition: NEW
Left rear frame rail assembly for 1968-1972 Chevy II / Nova vehicles, designed to restore factory rear structural integrity and correct suspension alignment. This replacement rail supports the trunk floor, rear spring/shock mounts and body…
Model: 5022393
Condition: NEW
This right-hand trunk floor side extension is a direct-fit replacement panel for 1962-1967 Chevy II models designed to restore the trunk floor's original shape and strength. It replaces corroded or damaged side sections, aligns with…
Model: 5022392
Condition: NEW
Left-hand trunk floor side extension designed for 1962-1967 Chevy II models. This precision-formed replacement panel restores the factory trunk floor profile, repairs rusted or damaged side sections, and re-establishes trunk alignment and…
Model: 5022377
Condition: NEW
This right-hand trunk floor drip off panel is a direct-fit replacement for 1962-1965 Chevy II models. It restores the factory trunk floor contour and channels water away from the trunk cavity to prevent rust and water damage. Built to…